[Waverley ARS] Restorers and builders first Meeting Tuesday 5th

[Eric van de Weyer]

Hi Texx,

Long time since we've seen anything from you. 

There is also a special sheet available (from Jaycar here in Australia as
well  as from other sources, of course). It is has a special blue coating on
a heat resistant plastic base and you just print onto the blue side and then
iron it on. Once it has cooled, you just peel off the plastic backing and
voila, you are ready to etch. Certainly much more expensive (about $6 per
sheet in packs or 5 but you can fill the sheet with multiple boards) than
paper but gives excellent results.

73....Eric VK2VE.

-----Original Message-----
From: members-bounces at us.cactii.net [mailto:members-bounces at us.cactii.net]
On Behalf Of Eddie Hanham
Sent: Wednesday, 30 January 2008 11:44
To: Texx
Cc: members at vk2bv.org
Subject: Re: [Waverley ARS] Restorers and builders first Meeting Tuesday 5th

Hi Texx,

Thanks for your response. we have tried this technique as well using 
normal A4 paper but with variable results. Main problem with ordinary 
paper is microscopic slithers of wood which leave gaps in the pcb 
track. Better paper is clay impregnated photo paper which is reputed 
to give reliable results down to 1/1000 inch tracks.

Some websites recommend matte inkjet paper others glossy. Best 
recommendation is to test stickiness with an iron before putting 
through laser printer.

Ben is trying magazine paper with photos already printed on them.

I am yet to find a supplier of matte paper!!

Some referneces are:

http://www.fullnet.com/~tomg/gooteepc.htm

http://www.geocities.com/jf_moreira/pcb_en.html

http://www.fullnet.com/~tomg/gooteepc.htm

Eddie
VK2BEH


> 
> Its bizarre hearing about a bar be queue at this time of year when I can
see 
> snow on the hills surrounding the SF bay.  (laughter)
> 
> Have you used the laserprinter method for making pc boards ?
> 
> For those who havent, you print the image on special paper mirror image.
> Next you apply the paper to a copper clad pc board and transfer the image
with
> a hot iron.  
> (HINT ! use an iron from a swap meet, not the one you use for clothes!)
> Now the paper will be stuck to the board.
> Soak it in water untill the paper comes off leaving the iamge on the
board.
> Now you are ready for a ferric chloride etch as usual.
> 
> Look ! Mum ! No darkroom required !
> 
> The ferric chloride is good for several etchings and when it is spent,
> allow it to dry up to a poweder.
> Go out in the garden & sprinkle it lightly in the plants.
> Plants love small ammounts of ferric chloride.
> 
> No "haz mat" !
> 
> 
> 


_______________________________________________
Members mailing list
Members at us.cactii.net
http://us.cactii.net/cgi-bin/mailman/listinfo/members